TM44 inspections for commercial buildings020 3811 8331

Business guidance / Compliance management

The TM44 compliance checklist for business operators.

Effective TM44 compliance depends on knowing which systems are installed, who operates them and whether the required inspection reports exist. This guide organises the evidence and decisions needed for one business building or an entire property estate.

  • Quotation agreed before any visit
  • Accredited energy assessors
  • Report lodged where a register applies

1. Identify the building and the relevant air-conditioning systems

Start with the exact site address and which floors, units or blocks contain air-conditioning. Obtain a plant schedule or, where documents are incomplete, list the approximate outdoor and indoor unit counts and any central equipment. Record manufacturer models and effective rated cooling output in kW where possible.

For England and Wales, qualifying systems have an effective rated output more than 12 kW. Relevant individual units controlled by the same person within a building may need to be considered together. An assumption that every small split system is separately exempt can therefore be wrong.

Review the capacity screening questions

2. Clarify who controls the system

The relevant person is generally the person controlling the operation of a qualifying air-conditioning system. A landlord may control shared central plant while the tenant operates separately installed cooling. Facilities managers and property agents often coordinate the records, but their administrative role does not automatically determine statutory liability.

Note plant ownership, controls, maintenance instructions, keys and previous report holders. If the responsible person changes and the new person does not receive a required inspection report, England and Wales regulations establish an inspection duty within three months of taking control.

Read the landlord and tenant responsibility guide

3. Check the last inspection and choose an accredited assessor

In England and Wales, qualifying systems must be inspected at intervals not exceeding five years. Obtain the complete inspection report and check the date, address, equipment assessed, energy assessor and register reference where applicable. A failed online postcode search is an UNKNOWN evidence state until further checking, not a confirmed lack of a certificate.

An appropriately accredited energy assessor must undertake the required inspection. The selected accreditation must be suitable for the installed cooling equipment, especially for central chillers, large VRF/VRV systems and technically complex sites.

4. Arrange site access, inspection and report evidence

A useful quotation identifies the buildings and cooling plant to be inspected, actual assessor availability, access constraints, relevant travel charges, report preparation, any required lodgement and VAT. Rooftop plant, security inductions, schools' safeguarding requirements and occupied premises can change the inspection scope and appointment planning.

After the visit, retain the signed or lodged report and any relevant reference alongside your asset register. Its energy-efficiency recommendations do not themselves constitute repairs, a maintenance contract or a guaranteed saving percentage.

Request a scope-based TM44 quotation

5. Monitor renewal dates without inventing compliance statuses

Keep a record for each building and relevant installation: last inspection, report reference, controller, plant list, known changes, unresolved documents and the next planning date. The original inspection date controls the five-year maximum interval for qualifying systems in England and Wales.

Scotland's statutory requirements differ, including the stated cooling-capacity threshold and the inspection interval determined by the Scottish approved expert. Northern Ireland also requires a jurisdiction-specific review. Do not apply one nation's penalty and registration rules to every site.

6. Understand enforcement without sales pressure

GOV.UK currently gives a £300 penalty in England and Wales for failure to hold a required air-conditioning inspection report. A separate £200 penalty can arise where the report is not produced within seven days following an applicable enforcement request. Past consultations about higher penalties should not be mistaken for legislation already in force.

We recommend resolving actual evidence gaps rather than treating an automated online score, a marketing badge or an equipment-service invoice as proof of compliance. The office can review an initial enquiry, but a quotation or acknowledgement does not certify a building.

Read enforcement and penalty details

Verify the England and Wales requirements on GOV.UK